Airija
Albanija
Argentina
Australija
Austrija
Belgija
Bosnija ir Hercegovina
Brazilija
Bulgarija
Danija
Estija
Filipinai
France
Graikija
Ispanija
Italija
Jungtinė Karalystė
Jungtinės Amerikos Valstijos
Juodkalnija
Kanada
Kolumbija
Kroatija
Latvija
Lietuva
Liuksemburgas
Meksika
Moldova
Naujoji Zelandija
Norvegija
Nyderlandai
Pietų Afrika
Portugalija
Rumunija
Serbija
Slovėnija
Suomija
Turkija
Ukraina
Vokietija
Čilė
Šiaurės Makedonija
Švedija
Šveicarija
Audio-Technica AT-XP3
Dual moving magnet stereo cartridge. The AT-XP series cartridges provide a high quality sound for vinyl DJ’s. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.
- Audiophile DJ cartridge equipped with a conical stylus
- VM dual magnet construction
- Durable robust design for high-quality specialist DJ playback
- Signal output level and output impedance characteristics suited for professional DJ applications
- Carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
- Compatible with the replacement styli ATN-XP5 and ATN-XP7 for an upgrade
- Configuration as single cartridge (AT-XP3), Replacement Stylus (ATN-XP3) and as headshell bundle together with the headshell AT-HS6BK available (AT-XP3/H)
- Accessories Included: Two 11 mm installation screws, Two 8 mm installation screws, Two washers, Two Nut, Non-magnetic screwdriver
- Mounting: Half-inch
- Frequency Response: 20 to 18,000 Hz
- Channel Separation: 20 dB (1 kHz)
- Output Channel Balance: 2.0 dB (1 kHz)
- Output Voltage: 5.5 mV (at 1 kHz, 5 cm/sec)
- Vertical Tracking Angle: 20 degrees
- Vertical Tracking Force Range: 2.0 to 4.0g (standard 3.0 g)
- Stylus Shape: Conical
- Stylus Size: 0.6 mil
- Stylus Construction: Bonded Round Shank
- Cantilever: Carbon reinforced ABS
- Coil Impedance: 6,700 Ohm (1 kHz)
- Coil Inductance: 550 mH (1 kHz)
- Static Compliance: 20 x 10 – 6 cm / dyne
- Dynamic Compliance: 6.0 x 10 – 6 cm / dyne (100 Hz)
- Recommended Load Impedance: 47,000 Ohm
- Recommended Load Capacitance: 100-200 pF
- Cartridge Weight: 6.2 g
- Dimensions: 17.2 x 17.8 x 28.3 mm
- Replacement Stylus: ATN-XP3
Tipas
Shape
Tracking Force
Tracking force recommended
3g
Tracking angle
20°
Frequency Range
Impedance (Ohm)
6700
Recommended load resistance
47 kOhm
Recommended load capacitance
100-200 pF
Channel separation at 1 kHz
20
Voltage
Mounting
1/2"
Weight (g)
6,2
Made in
Japan
Visos apžvalgos yra iš patikrintų klientų, kurie anksčiau įsigijo mūsų produktą.
Čekija
Slovakija
Automatinis vertimas
Čekija
Automatinis vertimas
Vengrija
Automatinis vertimas
Lenkija
Automatinis vertimas
Dokumentai
Naudojimo instrukcijos
Gamintojo informacija
Saugos instrukcijos
Konkrečius šio produkto saugos nurodymus rasi naudotojo vadove.
Pratęsta garantija 3 metams
Prekių grąžinimas iki 30 dienų
Nemokamas pristatymas nuo 299 €
Daugiau nei 3 mln. klientų
Profesionali pagalba