- Number of Channels: 1
- Frequency Range: 16Hz - 118kHz
- Impedance: 150 Ohm
- Phantom Power: Yes
- Inputs: Jack 6,3 mm TRS, Return (6,3 mm TRS), XLR
- Outputs: Jack 6,3 mm TRS, Jack 6,3 mm TS, XLR
Focusrite ISA One Analog Microphone Preamp
At the heart of the ISA range is the microphone preamplifier with its Lundahl input transformer — essentially the same circuit, based on the original ISA110, that has been used for 30 years in successive Focusrite designs. The input transformer imparts a special character to the sound that can't be truly emulated in any other way: inseparable from the microphone itself, the transformer input stage is ideal for use with classic microphones. But this mic pre has a twist the original didn't have, which makes it far more versatile: four carefully-selected impedances allow you to match microphone to input in different ways. Bring out the character of a classic mic or emphasise a special feature, or go for a totally transparent, modern sound — it's up to you.Whether you're an artist, engineer or producer, you'll appreciate the versatility of the ISA One, with its front-panel DI input. The DI includes low/high impedance switching and an amplifier output, and its own feed to the optional A/D converter and separate rear-panel XLR output.
Key Features:
ISA series transformer-based preamplifier
Encased in a rugged and portable chassis, ISA One offers the classic Focusrite microphone preamplifier at its lowest cost to date.
Flexible independent DI channel
ISA One is ideal for both engineers and demanding performers alike, featuring independent gain control, an output for routing to an amp, an independent XLR output on the rear and routing to the optional A-D converter.
Switchable impedance
Choose one of four carefully selected input impedances, including the original ISA110 setting, to suit any microphone.
Headphone output with volume control
ISA One can feed either a sum of the two input to the headphones output, or an external stereo cue mix (such as a stereo feed from an interface) via two TRS jack inputs on the rear of the unit.
Dedicated insert point
Allows you to place extra processing between the preamplifier or DI and the optional converter, such as an EQ or compressor.
Optional stereo 192kHz A-D converter
You can chose to upgrade your unit with an optional digital card that delivers the best A-D performance in its class (dynamic range of 118dB). Alternatively, the ISA One Digital comes with the A-D converter as standard.
Lundahl LL1538 Input Transformer
The original mic transformer used in the original Red modules helps to provide the unique sound and performance of this groundbreaking design.
Backlit VU meter with variable calibration
ISA One has a moving coil VU meter with variable calibration to suit analogue and digital recording media, alongside two six-LED peak meters; inputs can be metered either pre- or post-insert.
Whether you're an artist, engineer or producer, you'll appreciate the versatility of the ISA One, with its front-panel DI input. The DI includes low/high impedance switching and an amplifier output, and its own feed to the optional A-D converter and separate rear-panel XLR output.
Number of Channels: 1
This product offers a single channel, making it easy to connect and manage a single audio source. Ideal for simple recording or playback where minimal configuration is required.
Phantom Power: Yes
Phantom power provides the necessary voltage for condenser microphones that require an external power source to operate properly. This power supply is built directly into the microphone input, eliminating the need for additional power supplies.
Gain: 60 dB
The device features a gain with a maximum value of 60 dB, which increases the intensity of the input signal. It is crucial for optimizing the volume and sound quality needed for recording, live performances, or further sound processing, while maintaining its clarity and detail.
Inputs
- XLR
- Jack 6,3 mm TRS
- Return (6,3 mm TRS)
Outputs
- Jack 6,3 mm TS
- XLR
- Jack 6,3 mm TRS
DI Output: Yes
Equipped with a DI output that allows direct and balanced transfer of the audio signal to mixers or recording devices without loss of quality. This output minimizes noise and interference, making it ideal for professional environments where it is important to maintain a clean and strong signal over extended connections. The DI output is ideal for both live performance and studio recording.
Тype
Frequency Range
Impedance
Gain
60 dB
Signal to Noise Ratio
106 dB
Inputs
Jack 6,3 mm TRS (6 x), Return (6,3 mm TRS), XLR (2 x)
Outputs
XLR (2 x), Jack 6,3 mm TS, Jack 6,3 mm TRS (2 x)
DI Output
Yes
Package Contents
Power Cable
Made in
Great Britain
Documents
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.

