RockBoard RBO CAB F TMB 30 BK 30 cm MIDI kabelis
The RockBoard Flat Mini-TRS to MIDI Cable (Type B, 30 cm) is a purpose-built adapter cable that bridges compact TRS-MIDI devices with traditional 5-pin DIN MIDI gear. It pairs a straight DIN 5-pin plug with an angled 3.5 mm stereo jack (TRS) to keep pedalboards tidy and signal paths clean.
- Flat rectangular cable profile reduces twisting and prevents internal damage from mechanical stress
- Compact straight DIN 5-pin to flat angled 3.5 mm TRS — saves space on crowded pedalboards
- TRS-MIDI Type B pinout: MIDI 4 (Source) on tip, MIDI 5 (Sink) on ring, MIDI 2 (Shield) on sleeve
- Compatible with Novation, 1010Music, Arturia, Malekko, Polyend, Faderfox and similar TRS-MIDI Type B devices
MIDI Cable for Compact TRS-MIDI Setups
The RockBoard Flat Mini-TRS to MIDI Cable, TRS-MIDI Type B - 30 cm is a short adapter cable that connects compact TRS-MIDI pedals and controllers to traditional 5-pin DIN MIDI gear. It carries MIDI data only and uses the Type B wiring standard, routing MIDI Source (pin 4) to the TRS tip and MIDI Sink (pin 5) to the TRS ring — the correct pinout for devices from Novation, 1010Music, Arturia, Malekko, Polyend, and Faderfox. At 30 cm long, it is sized for short, point-to-point connections on a pedalboard.
Flat Cable Design with Angled TRS Plug
This MIDI lead uses a flat rectangular conductor profile that lies flush against the pedalboard surface, resists twisting, and reduces mechanical stress on the internal wiring. The angled 3.5 mm TRS plug keeps the connector body low, leaving clearance for adjacent pedals and patch cables.
Flat Rectangular Profile for Pedalboard Routing
Hugging the pedalboard surface and routing cleanly between pedals, the flat rectangular cable profile is the defining feature for pedalboard integration.
- Cable Profile: Flat rectangular — lies flush against the pedalboard surface
- Length: 30 cm — sized for short point-to-point pedalboard connections
- Color: Black
- Durability Feature: Flat conductor design prevents cable breakage and cable jams under repeated routing stress
Straight DIN 5-Pin to Angled 3.5 mm TRS, Type B Wiring
Chosen for compact pedalboard layouts, the connector pair pairs a standard straight DIN 5-pin on the MIDI end with a low-profile angled 3.5 mm TRS on the device end.
- Connector A (MIDI side): Straight DIN 5-pin male — standard MIDI jack
- Connector B (Device side): Flat angled 3.5 mm TRS male — low-profile stereo jack
- Connector Angle: Straight-to-angled — MIDI end straight, TRS end angled
- Pin Assignment (Type B): MIDI 4 (Source) → TRS tip, MIDI 5 (Sink) → TRS ring, MIDI 2 (Shield) → TRS sleeve — MIDI 1 and MIDI 3 not connected
TRS-MIDI Type B Device Compatibility
Type B wiring makes this cable compatible with compact TRS-MIDI devices from Novation, 1010Music, Arturia, Malekko, Polyend, and Faderfox. It is not interchangeable with Type A cables — the pin assignments are reversed.
- Compatible With: TRS-MIDI Type B devices — Novation, 1010Music, Arturia, Malekko, Polyend, Faderfox and similar
- Not Compatible With: TRS-MIDI Type A devices (Boss, Empress, Korg, Akai, MOD, Make Noise) — wiring is reversed
- Package Contents: 1 × MIDI cable
Spalva
Mikrofono įėjimas
Ne
A tipo jungtis
B tipo jungtis
Jungties kampas
Pakuotės turinys
MIDI Cable
Ilgis
30 cm
Kilmės šalis
Kinija
Dokumentai
Gamintojo informacija
Saugos instrukcijos
Konkrečius šio produkto saugos nurodymus rasi naudotojo vadove.
Pratęsta garantija 3 metams
Prekių grąžinimas iki 30 dienų
Nemokamas pristatymas nuo 169 €
Daugiau nei 3 mln. klientų
Profesionali pagalba
