Pasirink šalį, į kurią nori pristatyti siuntą

RockBoard RBO POW BLO ISO 6 Maitinimo adapteris

Prekės kodas: 1338176

RockBoard RBO POW BLO ISO 6 Maitinimo adapteris

Prekės kodas: 1338176

The RockBoard ISO Power Block V6 is a compact isolated multi-power supply for effects pedals, delivering clean and silent DC power to up to five 9V pedals plus an 18V link output. Galvanically isolated, highly filtered slots with individual short-circuit protection keep noise and ground loops out of the signal chain, while status LEDs make…

RockBoard RBO POW BLO ISO 6 Maitinimo adapteris

The RockBoard ISO Power Block V6 is a compact isolated multi-power supply for effects pedals, delivering clean and silent DC power to up to five 9V pedals plus an 18V link output. Galvanically isolated, highly filtered slots with individual short-circuit protection keep noise and ground loops out of the signal chain, while status LEDs make troubleshooting instant. At only 175 g and 120 × 70 × 25 mm, it mounts discreetly under most pedalboards and ships with an interchangeable-plug adapter and six flat power cables.

  • 5 isolated 9V DC outputs at 500 mA each plus 1× 18V DC link output at 2,000 mA
  • Advanced filtering eliminates high-frequency noise; external transformer blocks low-frequency interference
  • Per-output short-circuit protection and dedicated status LEDs isolate faults without dropping the rest of the rig
  • Compact 120 × 70 × 25 mm housing weighing 175 g, with 2.1 × 5.5 mm barrel connectors, center-minus polarity
Išsamesnis aprašymas tavo kalba kol kas nepasiekiamas. Aprašymas anglų kalba galėtų padėti.

Isolated Multi-Power Supply for Effects Pedals

The RockBoard ISO Power Block V6 is a multi-power supply for effects pedals built around five galvanically isolated, highly filtered 9V DC power slots and a dedicated 18V DC link output. Designed for guitarists, bassists and keyboard players who run mixed pedalboards, the unit delivers clean, consistent current to up to six effects devices while preventing the high-frequency buzz and ground-loop hum that plague daisy-chained or un-isolated supplies. The RockBoard ISO Power Block V6 is the right choice for players who need stage-ready, noise-free power for a compact pedalboard without sacrificing reliability.

Standout Filtering and Isolation Design

What separates this supply from cheaper alternatives is the combination of true transformer isolation on every output slot and a separate external power adapter that keeps audio-frequency interference away from the pedal chain. Each output also carries its own short-circuit protection and a dedicated status LED, so a fault on one pedal never kills power to the rest of the rig and the offending slot is identifiable at a glance.

Output Configuration — Power for Mixed Pedalboards

Five slots deliver 9V DC at up to 500 mA each through standard 2.1 × 5.5 mm barrel connectors, while a sixth output provides 18V DC at 2,000 mA for power-hungry pedals or for daisy-chaining additional ISO Power Block V6 units in series as a setup grows. Total available output current is 2,500 mA across the unit.

  • 9V DC Outputs: 5 × 500 mA — covers the majority of standard 9V effects pedals on a small-to-medium board
  • 18V DC Link Output: 1 × 2,000 mA — drives high-current pedals or links further V6 units in series
  • Total Output Current: 2,500 mA — headroom for a fully loaded compact rig

Isolation, Filtering and Protection — Why It Matters

Galvanic isolation between slots eliminates ground loops between digital and analog pedals, while the advanced filtering technology suppresses high-frequency noise that would otherwise bleed into the signal. The external transformer keeps low-frequency mains interference out of the audio path, and per-slot short-circuit protection means a single bad cable cannot darken the whole board.

  • Isolation: Galvanically isolated, filtered slots — each pedal sees its own clean ground reference
  • Short-Circuit Protection: Per-slot, with status LED — faults are isolated and instantly visible
  • Input Voltage: 100–240 V AC via the included 18 V DC adapter

Physical Specs and Connectivity — Built to Mount Under a Board

The housing measures 120 × 70 × 25 mm and weighs 175 g, small and light enough to fit unobtrusively under most pedalboards including the RockBoard DUO, QUAD and TRES series. The package includes an 18V DC adapter with interchangeable EU, UK, US/CA and AU/NZ plug heads, plus six RockBoard flat power cables for connecting pedals.

  • Dimensions: 120 × 70 × 25 mm — low-profile footprint for under-board mounting
  • Weight: 175 g — adds almost nothing to a gig bag
  • Connector Type: 2.1 × 5.5 mm barrel, center-minus — the industry-standard pedal power jack
  • Package Contents: 18V DC adapter with interchangeable plugs, 6 × RockBoard flat power cables

Who Is It For

The RockBoard ISO Power Block V6 is the right choice for guitarists, bassists and keyboard players running a compact pedalboard of up to six 9V or mixed-voltage pedals who need clean, isolated power without paying for a larger 10- or 16-output unit. It suits gigging musicians tired of hum and buzz from daisy-chain or wall-wart setups, home-studio players who want a tidy, low-noise rig, and anyone planning to expand later thanks to the 18V link connector that lets multiple V6 units be chained in series. It is also a sensible match for players who travel internationally, since the included interchangeable plug adapters cover EU, UK, US/Canada and AU/NZ mains sockets.

Suitability
Features

Išėjimų skaičius

6

Inputs and Outputs

Poliškumas

Center Minus

Package

Pakuotės turinys

Adapteris, Maitinimo laidas

Power supply

Įkroviklio tipas

Maitinimo šaltinis

Įtampa

9V, 18V

Srovė

2,5 A

Kištuko tipas

Barrel

Maitinimas

Adapteris

Accessory

Maitinimo adapteris komplekte

Taip

Dimensions and Weight

Plotis (mm)

70

Gylis (mm)

120

Aukštis (mm)

25

Grynasis svoris (kg)

0,175

Country

Kilmės šalis

Kinija

Dokumentai

Naudojimo instrukcijos
Gamintojo informacija
Gamintojas:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Vokietija
Atsakingas asmuo:
Warwick GmbH & Co Music Equipment KG
Saugos instrukcijos

Konkrečius šio produkto saugos nurodymus rasi naudotojo vadove.