Compact and lightweight multieffect designed for electric guitars. The Paul Landers PL1 Signature Fly Rig offers 2 SansAmp channels, one clean and one dirty. Like our other Fly Rigs, it offers the same ease, portability, confidence and multi-functionality for going direct to a mixer or P. A. and as a pre-amp/stompbox in live performances. The Paul Landers Signature Fly Rig features two all-analog SansAmp channels to switch between dirty and clean tones. The Feuer section has 3-band active EQ controls with switchable Mid, Drive and Level. The Wasser section has dual-band active EQ controls, compression, and Level. There's a Bite switch for a presence boost which provides extra clarity to the top end, increased definition to your notes, and an edginess with increased harmonics and a slight breakup. DLA with Tap Tempo + Vibrato + Ambiance: Delay is voiced for the sounds of a vintage tape echo. It features Time and Repeats controls and dedicated Tap Tempo footswitch. Vibrato alters the functions of Time and Level: Time controls the speed of the vibrato. Min = Slow; Max = Fast. Level adjusts the depth of the vibrato. In Vibrato mode, you can use the Tap Tempo to control the speed. Ambiance provides a smooth, full sweep to easily dial-in the amount of ambiance desired. Choose from: Out position = Close mic’d ambiance. In position = Standard room ambiance. BOOST: Independent dual-mode Boost function. Post-SansAmp positive boost up to +6dB and “negative” boost down to -10dB. TUNER: Chromatic Tuner is operable via the TAP/TUNER footswitch in the DLA section. You simply hold the footswitch down to engage the Tuner, which simultaneously mutes the signal path. OTHER FEATURES: 1/4-inch 1megOhm input; XLR output with ground lift; 1/4-inch low impedance output; Headphone button switches the 1/4” output into headphone mode; Rugged, all-metal housing; Metal footswitches and jacks; Silent-switching, custom footswitch actuators; Utilizes included 9V DC Universal Power Supply: Model #DC9. “Auto-switching,” self-adjusting 100V-240V, 200mA. Dimensions: 32 x 6. 5 x 3. 2 cm, Weight: 525 g