Sale has ended

Audio Probe SPARTAN A Sky Blue

4,40

1 x rated

Sale has ended

This product is no longer being manufactured or is not part of our offer anymore. We recommend choosing an alternative product.

Choose an alternative (4)

Ask a question

Save

Compare

Sale has ended

Choose an alternative (4)

Product code: AP-SPARTAN-SKB | ID: 220134

Description

Audio Probe SPARTAN A Sky Blue

USB Audio Interface with 2-input/2-output for Mac and Windows systems. With its vast 110dBA dynamic range and precisely designed analogue circuitry, SPARTAN A will bring perfection to your work, especially for audio editing and mixing based on virtual instruments. Independent volume controls for both speakers and headphones will provide the most flexible monitoring environment you ever experienced. The low latency device driver for Windows guarantees stable operation, and includes our innovative CAPTURE PROBE technology which allows you to freely route and mix every audio signal from both ASIO and WDM applications as logical inputs.

ANALOG PERFORMANCE

Line Outputs (Left, Right)
Type	Balanced Line Amplifiers
Connector Type	6.35mm TRS Phone (balanced)
Maximum Output Level	+14dBu @ 0dBFS, max master level
Frequency Response	-0.04dB, 20Hz to 20kHz
SNR and Dynamic Range	110dBA, 20Hz to 20kHz, Maximum Master Level
THD+N	0.0012% @ 1kHz, 0dBFS, Maximum Master Level
Output Impedance	440 ohms balanced
Crosstalk	<-120dB, 1kHz, Maximum Master Level, channel to channel

Headphone Outputs
Type	Stereo Headphone Amplifier
Connector Type	2 x 3.5mm TRS Phone (stereo unbalanced)
Maximum Output Level	+13dBu into 300 ohms
Frequency Response	-0.04dB, 20Hz to 20kHz
SNR and Dynamic Range	110dBA, 20Hz to 20kHz, @ +13dBu Output Level
THD+N	0.0014% @ 1kHz, +12dBu into 300ohms
Recommended	30 to 600ohms
Cross Talk	<-95dB, 1kHz, channel to channel, into 300ohms
Power @ 33ohm Load	200mW , (100mW/channel)

Microphone Input
Type	Low noise microphone preamp
Connector Type	XLR (1:Ground, 2:Hot, 3:Cold)
Total Preamp Gain	+50dB Approx.
Input Impedance	2.45 kohms balanced
Frequency Response	-0.15dB, 20Hz to 20kHz
EIN	-120dBu(A), 20-20kHz, Maximum Gain, Rs=150ohms
SNR(Minimum Gain)	110dBA, 20Hz to 20kHz, Minimum Gain
THD+N	0.0011% @ 1kHz, -1dBFS, Minimum Gain
Maximum Input Level	+2dBu@ Minimum Gain -48dBu@ Maximum Gain
Phantom Power	+48V, +/-10%, 5mA max

Instrument Input
Type	JFET High Impedance Preamp
Connector Type	6.35mm TS Phone (unbalanced)
Total Preamp Gain	+28dB
Input Impedance	5 Mega ohms
Frequency Response	-0.02dB, 20Hz to 20kHz
SNR(Minimum Gain)	109dBA, 20Hz to 20kHz, Minimum Gain
THD+N	0.002% @ 1kHz, -1dBFS, Minimum Gain
Maximum Input Level	+9dBu@Min Gain -19dBu@Max Gain

Monitor Mix
Type	Input signal Mono Mix to Output channel
Pan Law	-3dB Pan Law
Mix Function	Switch On : L+R/0.707 → Output L/R Switch Off : Monitor Off

DIGITAL SPECIFICATION

Clock and Jitter
Sample Rates	44.1, 48, 88.2, 96, 176.4 and 192kHz
Audio Clock Source	Asynchronous Clock System independent from USB clock. Master clock source of ADC and DAC is deliveredfrom precise on-boarded Crystal circuit.(less than 10ppm)-22.5792MHz distribute for 44.1, 88.2 and 176.4kHz-24.5760MHz distribute for 48,96 and 192kHz

Analog to Digital Converter
Type	24bit, 192kHz sigma-delta ADC
SNR and Dynamic Range	115dBA

Digital to Analog Converter
Type	24bit, 192kHz sigma-delta ADC
SNR and Dynamic Range	115dBA

Signal Indicator (Input)
Type	LED Level Indicators(Input 1, 2)
Level	GREEN : brightness control according to signal level : -30dBFS~-1dBFS RED : -1dBFS~0dBFS

Signal Indicator (Output)
Type	LED Level Indicators(Output 1, 2)
Level	Line Level GREEN : brightness control according to signal level. -20dBu~-+4dBu RED : above +4dBuHP Level GREEN : -19dBu~-+4dBu RED : above +4dBu

MIDI Input and Output
Type	Standard MIDI I/O
Connector Type	5pin DIN

USB
Type	USB 2.0 Highspeed Connection (USB3.0 ready)
Connector Type	Standard USB type B
Power	5V/500mA

GENERAL SPECIFICATION

Weight and Dimension
Dimensions(W x H x D)	172 x 56 x 132mm (Product), 227 x 95 x 178mm (Retail Package)
Weight	670gram (Product), 1010 gram (Retail Package)
Finish	Front, Rear Panel – ABSBody frame – Aluminum (Anodic Oxide Coating)

Environment
Operating Temperature	0 to 50 degree (Celsius), 32 to 122degree(Fahrenheit)
Storage Temperature	-30to 70 degree(Celsius), -22 to 167(Fahrenheit)
Humidity	Max. 80%

I have a remark regarding the description