The PG-2 F provides clean and sufficiently dimensioned power for your equipment. In its production, high-quality components are used, including Panasonic and Wima capacitors. Thanks to their excellent properties and PG-99 technology, up to 99.7% of high-frequency noise and interfering components that significantly reduce the peak performance of connected devices are eliminated. Combining unique shock wave protection up to 2775 Joules, the PG2-F is among the best professional devices in the field. It not only supplies your devices with clean and stable voltage, but also protects them against possible extreme fluctuations in the network.

Front panel

The PG-2 F offers a number of status and warning functions indicated on the display and via LEDs:

Display - indicator of the current voltage in the network (works even when the device is switched off)
LED grounding indication
LED indication of faulty power supply connection of one of the devices
LED indication of voltage filtering
LED indication of abnormal overvoltage
LED indication of protection activation
A dangerous long-term overvoltage is simultaneously notified by an audible alarm.

The right part of the front panel contains two filtered sockets for operative connection of any device. Next to it is a USB A slot for powering or charging digital devices.

In the left part you will find the main switch with a breaker, with which you can interrupt the power supply of all connected devices. It is also used to restore normal operation after solving problems with the supply voltage or connected devices. You are informed about the active Break function by an LED indicator.
Next to it is an XLR connector for connecting lighting including a DIM dimmer. Thus, when using the PG-2 F during live applications, you can illuminate all equipment installed in the rack without disturbing the spectators or listeners.

Rear panel

The 2U high PG-2 F has twelve filtered and surge protected sockets on the rear panel. They are divided into three independent circuits of four:

Analog Audio - suitable for analog devices such as preamps, processors, analog mixing consoles, etc.
Digital Audio - designed especially for digital devices. The digital audio jacks are reverse-filtered so that your digital devices do not affect or impair the functioning of the analog and power circuits, or send unwanted interference throughout the power supply.
High Current (device with high consumption) - for connecting active monitors or power amplifiers. This circuit is equipped with a turn-on and turn-off time delay circuit. This ensures that your monitors, amplifiers or equipment are the last to turn on and the first to turn off. This will prevent an unpleasant and dangerous "crack" for tweeters. So you can turn on and off your entire setup/rack/studio centrally by pressing a single button - starting the PG-2 F.
If you need to ground the PG-2 F, you can use the ground pin right next to the power socket. Next to the grounding pin, you will also find a second XLR connector for connecting the lamp. This one is also equipped with independent DIM dimming.
 

Your device deserves only the best power, your device deserves the Black Lion PG-2 F.

 
parameters and features:

input voltage: 230 V
maximum long-term current: 10 A
voltage and overvoltage protection
supply voltage filtering up to 99.7%
shock wave protection up to 2775 J
2x front and 12x rear drawers
three independent socket circuits: analogue, digital and power
time delay for power devices
network voltage indication
indication of all functions
2x connector for XLR lighting with dimmer
width: 19" (48.3 cm)
height: 2U (9 cm)
dimensions (W x H x D): 48.3 x 9 x 30 cm
weight: 6.8 kg