Light4Me DMX 192 F16 Apšvietimo valdiklis, sąsaja

LIGHT4ME DMX 192 F16 is a 192-channel DMX controller with 16 faders for DJs, lighting technicians, bands and event organizers who want to control lighting fixtures without a computer. It is suitable for weddings, small stages, clubs, community centers and event venues. During a concert, you can activate stored scenes, run chase programs and adjust selected channels manually at the same time. The 19-inch 3U format makes rack installation easy, while four support feet allow the controller to be conveniently placed on a tabletop.

Control of 12 DMX devices without continuously switching channels
The 192 DMX channels are divided into 12 fixed blocks of 16 channels, allowing the controller to operate up to 12 PAR lights, moving heads, lasers or other DMX512-compatible devices. The starting addresses of the blocks are 1, 17, 33, 49, 65, 81, 97, 113, 129, 145, 161 and 177. This arrangement simplifies fixture addressing and allows you to quickly select a device using one of the 12 buttons.
16 channel faders with a 0-10 scale provide direct control over the parameters of the selected fixture, such as brightness, color, strobe, Pan and Tilt position or effect selection. Manual mode allows channels to be adjusted in real time, while the manual setting clear function quickly removes applied corrections. The Blackout button sets all output channels to 0, allowing the lighting to be turned off immediately.

100 scenes and 12 chase programs for preparing a complete lighting show
The controller stores 100 scenes numbered 00-99, which can be created, edited, recalled, deleted and copied. Four multifunction Chase Step and Scene buttons simplify navigation during editing and playback. Prepare separate settings for guest arrival, a first dance, a concert or the event finale, then activate them without readjusting the faders.
Each of the 12 chase programs can contain up to 100 steps, with every step referring to one stored scene. You can select scenes for individual steps, add and delete steps as well as clear entire programs. The Speed fader controls the step duration, while the Cross fader determines the crossfade time between consecutive settings.

Where will LIGHT4ME DMX 192 F16 work best?
LIGHT4ME DMX 192 F16 simplifies lighting operation at weddings, stage events, corporate events and clubs, especially when the show needs to be repeatable and easy to activate. The built-in microphone allows chase program steps to be triggered by the rhythm of the music, enabling the controller to support dynamic shows without manually switching between scenes. A chase program can run simultaneously with manual control of selected devices.
The option of copying programs between two controllers reduces the time needed to prepare identical control stations or allows stored settings to be transferred to a backup device. The transfer requires a 3-pin male XLR to 3-pin male XLR cable, which is not included. Choose LIGHT4ME DMX 192 F16 when you need physical faders and a standalone console for operating basic and moderately complex DMX installations.

19-inch rackmount design ready for mobile and fixed installations
The iron housing protects the controls during regular use, while the black finish matches stage equipment and rack cases. The 4-digit 7-segment LED display shows the information required during programming ✳️ The DMX output uses a 3-pin female XLR connector with GND on pin 1, D- on pin 2 and D+ on pin 3.
AC power supplied through an IEC C14 inlet makes the power cord easy to replace, while a separate switch allows the device to be turned off without disconnecting it from the installation. Passive cooling operates without a fan, while the IP20 protection rating supports indoor use ✅ The controller has compact dimensions of 48.2 x 13.9 x 6.5 cm and weighs only 2.35 kg.

Technical specifications:

• Device type: fader-based DMX controller for stage lighting
• Application: control of PAR lights, moving heads, laser projectors and other DMX512-compatible devices
• Control protocol: DMX512
• Number of DMX channels: 192
• DMX channel assignment: 12 fixed blocks of 16 consecutive DMX channels
• Device starting addresses: 1, 17, 33, 49, 65, 81, 97, 113, 129, 145, 161, 177
• Number of supported devices: max. 12
• Number of channels per device: max. 16
• Number of channel faders: 16, 0-10 scale
• Number of device / scene / chase selection buttons: 12
• Navigation and editing controls: 4 multifunction Chase Step and Scene buttons
• Number of scenes: 100 (00-99)
• Scene operating modes: Edit / Run
• Scene functions: creating, saving, deleting, recalling and copying the contents of one scene to a selected target scene
• Number of chase programs: 12
• Chase program operating modes: Edit / Run
• Maximum number of steps per chase program: 100 (00-99)
• Chase program step content: reference to a selected stored scene
• Chase program functions: selecting a scene for each step, adding and deleting steps, clearing a chase program
• Chase program step time control: Speed fader, 0-100% scale
• Crossfade time control between chase program steps: Cross fader, 0-100% scale
• Sound activation (Music): chase program steps triggered using the built-in microphone
• Simultaneous chase program playback and manual device control: yes
• Chase program data copying between two controllers: yes
• Cable type for copying data: 3-pin male XLR to 3-pin male XLR, cable not included
• Manual control: direct adjustment of 16 channels of the selected device using the faders
• Manual setting clear function: clears channel values set in Manual mode
• Blackout function: sets all output channels to 0
• Display: 4-digit 7-segment LED display
• DMX data connector: 3-pin female XLR output
• DMX pin configuration: GND (pin 1), D- (pin 2), D+ (pin 3)
• Power connector: IEC C14 inlet
• Power cord length: 1.2 m
• Power supply type: mains power
• Power supply voltage: AC 90-240V, 50/60 Hz
• Power consumption: 4W
• Fuse: 1A
• Power switch: yes
• IP protection rating: IP20
• Cooling system: passive cooling through the housing
• Installation options: 19-inch rackmount installation or placement on a flat surface
• Rackmount height: 3U
• Support feet: 4
• Housing material: iron
• Color: black
• Device dimensions: 48.2 x 13.9 x 6.5 cm
• Net weight: 2.35 kg