RCF F 12XR
This 12-channel analog mixing console pairs on-board PRO DSP FX, an analog EQ section, four real compressors, and a stereo USB audio interface inside a 4.5 kg metal chassis — built for live performers and small studio setups who prefer dedicated fader-and-knob control over touchscreen menus.
- Six XLR microphone inputs with +48 V phantom power and an 80 Hz low-cut per channel.
- 16 onboard PRO DSP FX presets — Reverbs, Delays, Chorus, Flangers, Echoes — fully editable from the front panel.
- USB Type-B audio interface for two-channel stereo recording and playback into any DAW at 44.1 or 48 kHz.
- Four single-control analog compressors on channels 1–4 plus three-band EQ on every mono input strip.
12-Channel Analog Mixer with PRO DSP FX
The RCF F 12XR pairs a fully balanced audio path with onboard PRO DSP FX and a USB stereo interface. Conceived and engineered in Italy, the desk carries the analog DNA of the company's professional E Series into a portable format. Microphones, instruments, and a laptop can sit on the metal chassis at once, with the stereo mix routed straight to a DAW for project recording.
What Makes This Mixer Different
Most desks in this tier cut corners on EQ or dynamics. The console ships with four real analog compressors on channels 1–4 and full parametric EQ on every mono strip. A 1 MOhm Hi-Z input accepts passive guitar and bass pickups directly, while the internal universal power supply handles any mains voltage from 100 V to 240 V without adapters.
Channel Architecture
Twelve input strips cover vocals, instruments, and stereo playback without repatching.
- Channels: 12 total (6 mic, 4 mono line, 4 stereo line) — covers vocals, instruments, and stereo sources on one surface.
- Mic input impedance: 14 kOhm — clean signal transfer with dynamic and condenser microphones.
- At a Hi-Z input impedance of 1 MOhm, the circuit preserves the full tone of passive guitar and bass pickups.
EQ, Compressors, and Low Cut
The console ships with the analog tools engineers reach for when shaping a vocal or instrument.
- 3-band mono EQ: High ±15 dB @ 10 kHz shelving, Mid ±15 dB @ 1.25 kHz bell, Low ±15 dB @ 100 Hz shelving
- Compressors: 4 single-control analog compressors on channels 1–4 — fast audible vocal smoothing.
- The 80 Hz Low Cut filter clears stage rumble and handling noise before the mix bus.
FX Engine and USB Recording
Combined, the onboard PRO DSP FX engine and USB port deliver ambience, time-based processing, and DAW capture together.
- Onboard FX: 16 PRO DSP presets — Reverbs (Halls, Rooms, Plates, Spring), Delays (Mono, Stereo, Multitap), Chorus, Flangers, Echoes
- USB audio interface: Type-B, 2 playback / 2 record tracks, 44.1 / 48 kHz
- Main / Aux / Group outputs hit 28 dBu on XLR / Jack, delivering enough headroom to drive long cable runs into active speakers.
Who This Mixer Is For
The RCF F 12XR is the right choice for solo performers, duos, podcasters, and small bands who want an all-in-one analog surface with reliable USB recording. Live crews running small venues and houses of worship will lean on the 80 Hz low-cut, dedicated Hi-Z input, and four onboard analog compressors to tighten vocal mixes in seconds. An optional RM-KIT rack-mount kit and a 4.5 kg metal chassis make transport to rehearsal painless.
RCF — Italian Pro Audio Heritage
This console sits inside RCF's next-generation F Series, building on the analog legacy of the professional E Series. Engineered by R&D in Italy, the unit ships ready to record a first session into any DAW at 44.1 or 48 kHz straight out of the box.
Number of Channels
Power Supply
240V
UK/EU Power supply included
No
Width (cm)
37,3
Depth (cm)
35,5
Height (cm)
9,7
Net Weight (kg)
4,5
Made in
China
Visos apžvalgos yra iš patikrintų klientų, kurie anksčiau įsigijo mūsų produktą.
Dokumentai
Naudojimo instrukcijos
Saugos instrukcijos
Konkrečius šio produkto saugos nurodymus rasi naudotojo vadove.
Pratęsta garantija 3 metams
Prekių grąžinimas iki 30 dienų
Nemokamas pristatymas nuo 299 €
Daugiau nei 3 mln. klientų
Profesionali pagalba
